Granite component

Current location:HOME > Product display > Granite component >
Granite carving machine base

Granite carving machine base

:
Product Description: The base of granite carving machine is a rock measuring tool made of "Jinan green" stone by mechanical processing and manual fine grinding. Black luster, uniform texture, good stabi...
Tel: 13561283719

The base of granite carving machine is a rock measuring tool made of "Jinan green" stone by mechanical processing and manual fine grinding. Black luster, uniform texture, good stability, high strength, can maintain appropriate accuracy under heavy load and general temperature, and has the advantages of no rust, no magnetization, constant type, etc

the main mineral components of the stone of the base of the granite carving machine are pyroxene, plagioclase, a small amount of olivine, biotite and a small amount of magnetite. It has black luster and fine structure. After hundreds of millions of years of aging, it has uniform texture, good stability, high strength and good hardness, and can maintain appropriate accuracy under heavy load. It is used in industrial production and laboratory measurement

the purpose of fine grinding the plate surface of the base of the granite carving machine is to further precision the flatness of the semi fine grinding plate surface to the basis of accuracy. Carry out manual fine grinding of the marble inspection mechanical components with precision. The intention of fine grinding is to further fine grind the marble inspection mechanical components with precision, and the precision directly reaches the required precision. The marble inspection mechanical components that have reached the standard accuracy after careful grinding are polished. The polished marble inspection mechanical components have smooth and powerful surfaces and small plane roughness values, which protect the accuracy and stabilize the marble mechanical components. First, rough grind the marble inspection mechanical components that need to be repaired. The purpose of rough grinding is to rough grind the thickness and flatness of the marble inspection mechanical components under the standard

the rough ground marble mechanical components are subject to secondary semi fine grinding. The purpose of semi fine grinding is to reach the standard flatness after removing relatively deep scratches. After the initial adjustment is qualified, it shall be copied after standing for 12 hours. If it is unqualified, it shall be adjusted again. If it is qualified, it can be used

before the base of granite carving machine is used. Protect the debugging level of the marble mechanical components, and then wipe dry and polish with a clean soft cloth (or wipe the board surface with a sticky alcohol cotton cloth). Keep the marble flat table clean to avoid affecting the measurement accuracy. The operation details of using marble mechanical components are as follows:

1. Place the workpiece to be tested and relevant measuring tools on the flat plate for 35 minutes, and measure it after the temperature is used

2. When moving the orientation of marble mechanical components, it is necessary to re adjust the levelness

3. After use, in order to avoid the overall deformation of the marble mechanical components, the workpiece should be removed from the mechanical components to avoid the workpiece from long-term heavy pressure on the marble plate, forming the deformation of the marble mechanical components

4. The workpiece should be slowly placed on the marble mechanical components. When the marble mechanical components are used. Avoid the mechanical components of Dali from being hit, which will form the deformation and damage of mechanical components

5. The weight of the workpiece should not exceed the rated load of the plate, otherwise it will fall down, and the structure of the plate may be damaged, forming the deformation of the plate, which cannot be used

6. In the process of application, the workpiece on the marble mechanical component should be handled with care, and the rough workpiece should not be moved on the mechanical component to avoid bumping, scratching and other damage to the surface of the mechanical component

7. The mechanical components should be cleaned in real time, and the marble mechanical components are not necessary. Then, the surface of the mechanical components and various steel parts on the surface are coated with a layer of antirust oil, covered with antirust paper, and covered with the outer package of the marble mechanical components, so as to avoid the damage to the marble plate caused by carelessness

8. Marble mechanical components should be placed in a dry and ventilated environment with low noise, little dust, no vibration, stable temperature

9. When measuring the accuracy of the same workpiece repeatedly, it should be selected in the same period when the temperature is stable. Granite measuring tools, fine measuring instruments, marble measuring tools, fine machinery

10. Do not place other objects on the marble mechanical components, do not knock or bump the marble mechanical components, and choose 75% ethanol one-to-one alcohol as the detergent. Avoid using liquids with severe corrosion as detergents

11. Clean the sundries that may be left on it after each application; Wipe the board surface clean (it can be cleaned with neutral detergent) and cover it with a protective cover


               
 
  • Tel:+86-13561283719

  • E-mail:ruijing@ruijingsd.com

  • Contact:Manager Su

  • Address:West head of zhaozhaizi village, zhaozhaizi Town, Gaotang County

Follow website

Follow website


Copyright © 2022-2023 http://www.shandongruijing.com. All Rights Reserved Gaotang Ruijing Precision Machinery Co., Ltd 鲁ICP备2022021351号-1